X-axis (Gantry Travel) ~ 2500 – 3000 mm
The “2500” in the model likely refers to an X-axis travel of approximately 2500mm.

• Y-axis (Vertical Travel) ~ 800 – 1200 mm
• Z-axis (horizontal travel) ~ 300 – 500 mm
  Spindle system
• Spindle type: Direct drive/ electric spindle, suitable for milling, drilling, and tapping.
• Maximum spindle speed: ~18,000 – 24,000 rpm for high-speed processing of aluminum profiles.
• Spindle power ~ 15 – 22 kW
  Feed system
• Rapid traverse speed (X/Y/Z) ~ 30 – 48 m/min
• Cutting feed rate ~ 1 – 20 m/min
  Workbench
• Workbench length ~ 3000 mm or custom, can be extended as needed.
• Workbench with T-slot table or pneumatic/hydraulic fixtures for securing profiles.
• Maximum load capacity: 1,000 – 2,000 kg
  Accuracy
• Positioning accuracy: ±0.05 – 0.1 mm / full range
• Repeatability accuracy ±0.025 – 0.03 mm